At Ta C H I N G Y O U R C A M E R A - Promaster CHRONICLE User Manual

AT TA C H I N G Y O U R C A M E R A

(USING THE QUICK RELEASE PLATE)
The Chronicle comes with its
how to change it to phone mode and then back to camera mode, please refer to the
"Attaching Your Phone" section of this manual.
Loosen the QR knob
plate to your camera by threading its
located in the bottom of your camera (or lens). Use the
QR plate
tighten the
(included with the tool kit) to tighten the
(with your camera attached) into the top of the
hold it in place.
On the bottom side of the
QR plate
These prevent the
ball head if the QR knob
Removing the bolts will allow the
easily, but it will eliminate the safety feature. We do not recommend you remove
the safety bolts from the
Note: The Chronicle's
connecting a grip strap or cross-body style carrying strap.
Mounting Bolt
(1/4" - 20 thread)
ball head set to camera mode. To learn more about
on the ball head and remove the
mounting bolt
to your camera properly. You can also use the 4 mm hex wrench
QR Plate
you will notice two protruding
and camera from accidentally sliding off the top of the
is loosened. The
QR plate
QR plate.
QR plate
has an integrated
Strap
Slot
Bail
QR plate. Connect the
into the tripod connection port
bail
on the
mounting bolt. Now place the
ball head
and tighten the
safety bolts can be removed if you choose.
to slide into the top of the
strap slot. This slot is handy for
QR
mounting bolt
to
QR plate
QR knob
safety bolts.
ball head more
Safety Bolts
(2.5mm hex)
Mounting Bolt
(4mm hex)
to
7