Promaster CHRONICLE User Manual page 16

To add a 3-leg base
monopod's base. You may choose to store this foot in the
in the tripod collar
mini tripod / 3-leg base
ahold of the
This unit will now serve as a
of the monopod by screwing it into the area from which you just removed the foot.
Spread the 3 legs and place the monopod on the ground. Notice the
near the top of the
upright with only a horizontal panning movement (thereby locking the
move the sliding collar
monopod around in a variety of angles.
16
to the monopod, unscrew the
or place it in the tripod's fabric bag for safekeeping. Now take
which you previously removed from the Flexor.
3-leg base
3-leg base. Move this
up to reveal the
Sliding Collar
3-Leg Base
removable foot
for the monopod. Connect it to the bottom
sliding collar
down to hold the monopod
ball joint, which will allows you to move the
from the
3/8"-16 attachment port
sliding collar
ball joint). Or,
Monopod
Removable Foot