Table of Contents
Advertisement
Chapter 3 – Maintenance
This chapter describes how to uninstall or upgrade the Wireless Utility.
3.1
Uninstall the Driver
Follow the steps below to remove (or uninstall) the USB Adapter driver from your computer.
To remove the driver from the OS, go to Start -> Control Panel
Step 1.
Double-click System
Step 2.
Under Hardware tab, click Device Manager.
Step 3.
Double-click Network Adapter
Step 4.
Right-click mouse button on "802.11n USB Wireless Network Adapter", and
Step 5.
choose Uninstall
Click OK to confirm that you are going to uninstall the driver
Step 6.
3.2
Uninstall the Client Utility
Follow the steps below to remove the Client Utility from your computer.
To remove the utility from the OS, go to Start -> Control Panel
Step 1.
Double-click Add-Remove Programs
Step 2.
Select 802.11n Wireless Client Utility, and click the Remove button
Step 3.
3.3
Upgrading the Wireless Utility
To perform the upgrade, follow the steps below.
Download the latest version of the utility from the web site and save the file on your
Step 1.
computer.
Follow the steps in Section 2.2 to remove the current Wireless Utility from your
Step 2.
computer.
Restart your computer if prompted.
Step 3.
After restarting, refer to the procedure in the Chapter 2 to install the new utility.
Step 4.
28
Advertisement
Table of Contents
