Table of Contents
Advertisement
9. Click "Detail" button.
10. You will look like the below figure.
*If Credential#1 is reliable and present, system will connect with Credential#1. On the
contrary, system will auto rotate to the next existed credential.
*Also you can click "Rotate" button. Command to rotate to the next credential you want to
use.
Describe "WPS Status Bar" - "PIN - xxx" as follow :
1. A successful PIN Configuration :
Start PIN connection - SSID ~> Begin associating to WPS AP ~> Associated to WPS AP ~>
Sending EAPOL-Start ~> Sending EAP-Rsp (ID) ~> Receive EAP-Req (Start) ~> Sending
M1 ~> Received M2 ~> (Received M2D ~> Sending EAP-Rsp (ACK)) ~> Sending M3 ~>
Received M4 ~> Sending M5 ~> Received M6 ~> Sending M7 ~> Received M8 ~> Sending
26
Advertisement
Table of Contents
