Seiko Astron GPS SBXA038-1 Basic Manual page 13

6
TROUBLESHOOTING
How to manually set the time
1 2
Unlock the crown Pull out the crown to the second click
Unlock the crown The second hand moves to the 13-sec
position and stops.
Unscrew
3
Continue to press Button A (3 sec) and then release it
when the hand moves to the 0-sec position
The second hand moves to
Press
stop at the 0-sec position.
for
The watch enters the
3 sec
manual time setting mode.
※ W hen the watch enters the manual
time setting mode, the reception
result will be displayed as N, since
the reception results data will be lost.
5
Push the crown back (in simultaneously with a time signal)
Operation has been
completed.
0 1 2
※ E ven if GPS signals cannot be received, the watch can be used with the same accuracy as a normal quartz watch. (at loss/gain ±15 seconds
per month on average)
※ I f the watch receives GPS signals after manual time setting, it displays the received time.
0 1 2
2nd click
4
Press Button B or Button C to set the time
When the button is kept pressed for 2
Press
to advance seconds or longer, the hour/ minute
1 min
hands will start to move continuously,
and when it is pressed again, they
stop moving.
※ T he hands will not move by turning
the crown.
Press
※ T he point in which the date changes is
to set back
at 0:00 AM (12:00 PM). Set the time
1 min
taking into consideration AM or PM.
※ L ock the crown.
While pressing the crown in
Push
back
in Screw
52
6
TROUBLESHOOTING
How to manually set the date
When the date is not automatically changed under a condition in which the watch is unable to receive GPS
signals (when changing from months with 30 days or less to months with 31 days), set the date manually.
・ T he date can be set independently regardless of the time.
・ W hen using the watch again under a condition in which the watch is able to receive GPS signals, receive
GPS signals to set the time and date.
※ W hen the date is not correct even when the watch has successfully received GPS signals, the preliminary position of the date may be misaligned.
1
Pull out Unlock the crown
to the
Unlock the crown
3
Press Button B or Button C to set the date
When the button B is kept pressed for 2 seconds or longer, the date
will start to move continuously. Press the button B again to stop.
2
Pull out the crown to the second click
The second hand
moves to the 13-sec
position and stops.
Unscrew
4
Push the crown back in
Operation has been completed.
※ W hen the watch
enters the manual
Press to
time setting mode,
advance
the reception result
1day
will be displayed
as N, since the
reception results data
will be lost.
※ T he date will not
move by turning the
crown.
Press
※ D uring movement of
to return
the date, the buttons
1day
cannot be operated.
53
0 1 2
Pull out
to the
2nd click
※ L ock the crown.
While pressing
the crown in
0 1 2
Push
Screw
back
in