Table of Contents
Advertisement
en Shelf supports
3.
Pull the rail out towards the front until the retainer at
the back unhooks.
4.
Remove the pull-out rail.
5.
Clean the pull-out rail.
→ "Cleaning products", Page 21
18.4 Attaching the pull-out rail
Note: The pull-out rails only fit on the right or left. Make
sure when you fit them that you can pull them out to-
wards the front.
1.
Insert the pull-out rail between the two bars.
26
2.
Push the retainer
upper bar.
3.
Keep the PUSH tab pushed in
out rail inwards until the front retainer
between the two bars
Release the PUSH tab.
‒
a The retainer
clicks into place.
4.
Pull the pull-out rail out as far as it will go and slide
it back in.
18.5 Detaching the rails in the top cooking
compartment
WARNING ‒ Risk of burns!
The shelf supports get very hot
▶
Never touch the shelf supports when hot.
▶
Always allow the appliance to cool down.
▶
Keep children at a safe distance.
1.
Lift the rail forwards slightly
in between the lower and the
and swing the pull-
is located
.
and detach it
.
Advertisement
Table of Contents
