Specifications; Low Battery Indicator - La Crosse Technology 616-12667-INT Setup Manual

Stay in Touch
Ask questions, watch setup videos, and
provide feedback on our social media outlets.
Follow La Crosse Technology on YouTube,
Twitter, Facebook and Instgram.

Low Battery Indicator

By the Indoor Temp, replace clock batteries.
By the Outdoor Temperature, replace
sensor batteries.
Care + Maintanence
Do not mix old and new batteries.
Do not mix Alkaline, Lithium, standard, or
rechargeable batteries.
Always purchase the correct size and grade
of battery most suitable for intended use.
Clean the battery contacts and also those of
the device prior to battery installation.
Ensure the batteries have with correct
polarity (+ / -).
Remove batteries from equipment that will
not to be used for an extended period.
Promptly remove expired batteries.
Designed in La Crosse, Wisconsin
• •
Made in China Printed in China

Specifications

Projection Clock (616-1410B / 616-41667)
Temperature Range:
32°F to 99°F (0°C to 37°C)
Power Requirements:
5 volt Power cord AC6:
Optional: 3-AAA LR3, IEC, batteries for
backup (not included)
The plug on the power adapter is intended to
serve as the disconnect device, the
socket-outlet shall be installed near the
equipment and shall be easily accessible.
Dimensions:
5.83" L x 1.61" L x 4.06" H
(14.8cm L x 4.1cm W x 10.3cm H)
Outdoor Sensor (TX141-Bv3)
Temperature Range:
-40°F to 140°F (-40°C to 60°C)
Transmission Range: Over 330 ft. open air
(100 meters) RF 433MHz
Update Interval: About every 51 seconds
Power: 2-AA, IEC, LR6 batteries
Battery Life: Over 12 months
Dimensions:
1.57" L x 0.79" W x 5.12" H
(4.0cm L x 2.0cm W x 13.0 H cm)
•
DC 030821
GPU280500150WAOO
(not included)
9