Connecting The Transmitter; Connecting With The Usb Cable (Usb Input) - Panasonic SC-GNW10 Owner's Manual

Connecting the transmitter

Connecting with the USB cable (USB input)

Connect to a device with a USB port (PC, PS4/PS5, Nintendo Switch etc.).
• Power is supplied from the USB port that the transmitter is connected to.
• First turn on the device to be connected, then connect the transmitter.
• The operation indicator of the transmitter lights (cyan) when there is a wireless connection with this unit and blinks
(cyan) when there is no wireless connection with this unit.
• In order to properly use this unit, depending on the operating environment and OS, you need to change some sound
settings on the computer. (
A USB cable (supplied)
B Connected device
C USB port
Note:
• Do not use any other USB cables except the supplied one. Doing so may cause malfunction.
The shorter cable is specifically for recharging, and as such it cannot be used to connect with the transmitter.
l
9, "When connecting to a PC")

USB
Before use


8