Table of Contents
Advertisement
After a profile is successfully added, the profile name can be seen on the profile list; you can edit,
import or export the profile, click "Active" to finish the connection, now you can also view the
detailed connection status on the "Link Information"screen.
NOTE:
If the SSID broadcast function of the wireless router or AP you wish to connect is disabled,
then the wireless adapter cannot scan the SSID, thus you need to connect by creating the
corresponding profile.
2. Ad-Hoc Profile management
Using the Ad-hoc mode to establish a wireless network requires that each computer should be
equipped with a wireless network adapter. By connecting these wireless adapters, computers are able
to share the resources. The detailed setting steps are as follows:
1）Firstly you'll have to allocate a static IP to each wireless adapter to be connected in Ad-hoc
mode.
A. rightclick "My Network Places" on your computer's desktop and selects "Properties".
16
Advertisement
Table of Contents
