Table of Contents
Advertisement
3."Statistics" screen is used to count the total Rx and Tx data packets,including transmitted,
retransmitted and fail to receive ACK after all retries. You can click the "Reset Counter" button to
clear the count.
4.1.3 Profile Settings
Except the above common connection type, you can also connect to the wireless network by
adding a profile on the "Profile List"screen. The Profile screen is used to save the wireless network
parameters. When the adapter is successfully connected to a network, the profile name of this
network will automatically be added here, which helps the adapter to quickly connect to the wireless
network next time. However, there's one exception that when you have set the hidden SSID,namely
the SSID cannot be scanned, and then you must manually connect by adding the profile name. The
main interface is as shown below.
Add: create a new profile
Delete: delete the existing profile
Edit: modify the existing profile
There are two network types for your option when clicking the "Add" button to add wireless
adapter connection: Infrastructure and Ad-Hoc.
14
Advertisement
Table of Contents
