2. If the wireless network you are connecting is encrypted, you'll be prompted to enter the key.Click
"Ok" after you enter the correct key.
3. It shows "Connected" after successfully connected. You can disconnect it, view its status or
modify the wireless network properties by right click the wireless network
When you are installing the driver, select "Install driver and Ralink WLAN utility" and the
adapter driver and client utility will be installed. All functions of this adapter can be configured
viaits utility interface (in the following text it is abbreviated as UI).
Select "Start"—"All Programs" —"Ralink Wireless"— Ralink Wireless Utility", or click the "Ralink
Wireless Utility" shortcut on your PC's desktop to start the UI.
4.1 Client Mode
Client Mode Overview
It is a common solution to use the wireless network adapter as a client to receive signals.
Chapter 4 Wireless Utility
10