Cana Kit CKXW1000 User Manual page 13

For the networks that are not encrypted, you can directly click "Connect". However, for the
encrypted wireless networks, a "Profile Settings" dialog will pop up and you must select the
corresponding authentication type and encryption type, and then click the "Next" button to input the
correct key. Please note that this type of connection will not create a profile, thus next time connect
to this network you still need to select it manually.
The detailed explanations about the authentication and encryption are as follows:
WEP：Supports 10/26-bit Hex characters and 5/13-bit ASCII.
WPA-PSK：Supports 8-63-bit ASCII and 8-64-bit Hex characters.
12