Doro 1881 Manual page 47

IMPORTANT!
Using data services while roaming can be costly. Contact your service
provider for data roaming rates before you use data roaming.
Network selection
Your phone automatically selects the network operator that you have a
subscription with. When roaming or if you otherwise have no signal you
can try to manually select a network.
1. Press Menu
2. Select Auto select to select network automatically or Manual select
to select network manually and a list of available network operators is
displayed (after a short delay). Select desired operator and press
IMPORTANT!
If you select a network manually, your phone will lose network
connection when the selected network is out of reach. Remember to set
Auto select.
Network type
Your phone automatically switches between the mobile networks that are
available where you are. You can also manually set your phone to use a
specific mobile network type. Different status icons are displayed in the
status bar depending on the type of network that you are connected to.
Press Menu
Settings
• 4G/3G/2G: to automatically switch for best service between 2G, 3G
and 4G.
3G/2G: to automatically switch for best service between 2G and 3G.
•
2G: for 2G service only.
•
IMPORTANT!
If you set your phone to use 3G/2G or 2G, you will not be able to make
any calls, including emergency calls, or use other features requiring a
network connection, if the selected network type is unavailable.
VoLTE
Set if voice calling over LTE (4G) network should be enabled or disabled.
This menu is only visible if your service provider supports the feature.
English
Settings Connections
Connections
43
Network selection.
Network type:
.