Press-Fit Bb - Shimano FC-MT500-2 Manual

INSTALLATION

PRESS-FIT BB

„ PRESS-FIT BB
BB-MT500-PA / BB-MT800-PA
Bottom bracket cups
(A)
Assembly example
Bottom bracket shell with 92 mm width
• The 2.5 mm spacer is not needed for a bottom
bracket shell width of 92 mm.
• Use the inner cover.
(B)
(D)
Bottom bracket shell with 89.5 mm width
• For a bottom bracket shell width of 89.5 mm,
insert the 2.5 mm spacer into the right-hand
side (between the frame and the right-hand
cup).
• Use the inner cover.
(C)
(E)
(A)
13
(A)
Left-hand cup
(B)
Inner cover
(C)
Right-hand cup
(D)
Bottom bracket shell width
(E)
2.5 mm spacer
NOTICE
Some models do not need spacers.
(A)
2.5 mm spacer
NOTICE
•
If the frame has openings for the bottom
bracket shell, attach an inner cover sleeve
to prevent foreign objects from getting
inside.
•
If the frame has no openings inside the
bottom bracket shell, it can be installed
without the inner cover sleeve.