Table of Contents
Advertisement
MAINTENANCE OPERATIONS
WARNING: ALL THE DESCRIBED OPERATIONS MUST BE DONE WITH THE PLUG DISCONNECTED FROM THE POWER SOCKET.
BEFORE STARTING ANY MAINTENANCE OR CLEANING JOB, ALWAYS WEAR ADEQUATE PROTECTIVE CLOTHING, EYEWEAR AND/OR
GLOVES ACCORDING TO THE TYPE OF JOB TO BE DONE.
FOR SMOOTH DUST COLLECTOR OPERATION, THE FOLLOWING PERIODIC MAINTENANCE IS NECESSARY:
•
Check to see whether the filter is worn or clogged.
•
Make sure the sealing gaskets of the motor head base, of the filter-holder ring and of the container are working efficiently.
•
The electrical parts (plugs, switches, cables, etc.) must not be damaged.
•
The screws and nuts must always be tight.
•
Make sure the Longopac bag is not overfilled. The bag should be replaced when the filled portion reaches 1/2 - 3/4 of the distance
between the support plate and the Longopac holder.
•
Check the integrity of the flexible vacuum hose and accessories to be used.
•
If the flexible hose is perforated, the power of the dust collector will be reduced and dust and liquids will leak into the environment.
ATTENTION: IT IS RECOMMENDED THAT THIS MACHINE BE SERVICED BY NFE OR ITS AUTHORIZED DEALERS.
23
Maintenance
403079_RevB
Advertisement
Table of Contents
