Table of Contents
Advertisement
Operation
CAUTION: BEFORE INSTALLING THE DUST COLLECTOR, CAREFULLY MAKE A SIGHT CHECK TO PINPOINT ANY DAMAGE SUFFERED
DURING TRANSPORT.
INSTALLATION
In the event of any component parts being damaged, do not proceed with installation. Notify the manufacturer and reach an agreement on how
to proceed.
THE DUST COLLECTOR ALREADY FEATURES A SUCTION FILTER.
•
Fit the equipment or accessory required for the type of collecting operation on the opposite end of the hose.
•
Contact your dealer for information relating to the different types of optional accessories available for this specific dust collector model.
•
Make sure the power supply corresponds to the voltage and frequency indicated on the dust collector plate.
IMPORTANT! DO NOT FIT THE PLUG IN THE POWER SOCKET WITH WET HANDS.
ATTENTION! IN THE EVENT OF AN EXTENSION CORD BEING USED, MAKE SURE THIS IS IN PERFECT CONDITION, IN COMPLIANCE
WITH CE STANDARDS AND WITH CABLE CROSS SECTION SUITABLE FOR THE POWER INPUT OF THE DUST COLLECTOR.
DESCRIPTION OF CONTROLS
1. START/STOP buttons (three switches, one for each motor)
2. Power on light indicator
3. Filter pressure drop gauge
1
16
2
3
403079_RevB
Advertisement
Table of Contents
