Maintenance Menu - Ricoh 1013 Operating Instructions Manual

Maintenance Menu

There are three menu items in the "Maintenance" menu.
• Restart Printer
• Menu Reset
• Hex Dump
Maintenance Parameters
Menu
Restart Printer
Menu Reset
Hex Dump
Restarting a Printer
The following procedure describes selecting the "Restart Printer" as an example
in the "Maintenance" menu.
A A A A
Press the { { { { User Tools/Counter} } } } or { { { { User Tools} } } } key.
The key differ depending on the machine. Confirm that which type of ma-
chine you have.
B B B B
Press the 0 0 0 0 or 1 1 1 1 key to display "Printer Features".
C C C C
Press { { { { OK} } } } .
The following screen appears on the panel display.
Description
You can restart the printer.
All the settings you made for printer function are reset, and also
downloaded fonts are deleted.
⇒ p.37 "Restarting a Printer"
You can reset the menu settings to the factory defaults except the
optional Network Interface Board settings.
You can set to isolate the source of a print job problem. With this
function "On", all data sent to the printer is printed in hexadeci-
mal character representation.
• On
• Off
Note
❒ Default: Off
Printer Features Parameters
4
37