ICON Health & Fitness NordicTrack C1650 User Manual page 25

• The speed of the walking belt
• A track representing 1/4 mile (400 m)
• Your pace
• Your current lap number
• Your heart rate (see step 6)
If desired, adjust the volume
by pressing the volume but-
tons on the console.
To pause the workout, touch one of the menu
buttons on the screen or press the Stop button
on the console. To continue the workout, touch
the Resume button or the Start button. To end the
workout session, touch the End Workout button.
6. Measure your heart rate if desired.
You can measure your heart rate using either
the handgrip heart rate monitor or a compatible
heart rate monitor. For information about pur-
chasing an optional chest heart rate monitor,
see page 31. The console is compatible with all
BLUETOOTH ® Smart heart rate monitors.
Before using
the handgrip
heart rate mon-
itor, remove
the sheets of
plastic from
the metal con-
tacts on the
pulse bar. In
addition, make
sure that your
hands are clean.
Contacts
To measure your heart rate, stand on the foot
rails and hold the contacts with your palms for
approximately ten seconds; avoid moving your
hands. When your pulse is detected, your heart
rate will be shown. For the most accurate heart
rate reading, continue to hold the contacts for
about 15 seconds.
7. Turn on the fan if desired.
The fan features several speed settings and an
auto mode. When the auto mode is selected,
the speed of the fan will automatically increase
and decrease as the speed of the walking belt
increases and decreases.
Press the small fan but-
ton repeatedly to select
a fan speed or to turn off
the fan. Press the large
fan button to select a fan
speed or the auto mode.
8. When you are finished exercising, remove the
key from the console.
Step onto the walking platform and touch the home
button or the back button on the screen or press
the Stop button on the console. A workout sum-
mary will appear on the screen. After you view
the workout summary, touch the Finish button to
return to the main menu. You may also be able to
either save or publish your results using one of the
options on the screen. Then, remove the key from
the console and put it in a secure place.
When you are finished using the treadmill, press
the power switch into the off position and unplug
the power cord. IMPORTANT: If you do not do
this, the treadmill's electrical components may
wear prematurely.
25