Signal Connection; Art-Net ™ Connection; Sacn Connection - Iluminarc LOGIC Wall Panel 16-Port Quick Reference Manual

EN
RDM
Remote Device Management, or RDM, is a standard for allowing DMX-enabled devices to communicate bi-directionally
along existing DMX cabling. Check the DMX controller's User Manual or with the manufacturer as not all DMX controllers
have this capability. The LΩGIC Wall Panel 16- Port supports RDM protocol that allows feedback to make changes to
menu map options. Download the User Manual from

Signal Connection

The LΩGIC Wall Panel 16- Port can link to controller software using an Ethernet connection. If using other Art-Net™ or
sACN -compatible products with the LΩGIC Wall Panel 16- Port, you can control each individually on a single network.
See the User Manual for information about how to connect and configure the product for these signals.
Art-Net Connection
™
Art-Net™ is an Ethernet protocol that uses TCP/IP which transfers a large amount of DMX512 data using an RJ45
connection over a large network. An Art-Net™ protocol document is available from www.iluminarc.com.
Art-Net™ designed by and copyright Artistic Licence Holdings Ltd.

sACN Connection

Also known as ANSI E1.31, Streaming-ACN is an Ethernet protocol that uses the layering and formatting of Architecture
for Control Networks to transport DMX512 data over IP or any other ACN compatible network.
Mounting
Before mounting this product, read the
• Can be mounted using a wall mount.
• can be mounted using a rack mount.
Make sure the mounting hardware is capable of supporting the weight of the product.
Mounting Diagram
M8 bolts,
or
1/4 In bolts/screws,
or
3/8 in bolt/screws
It is possible to detach the rack ears and move them to the front of the product for rack mount
installation.
5
QUICK REFERENCE GUIDE
www.iluminarc.com
Safety Notes. The LΩGIC Wall Panel 16- Port:
for more details and an RDM chart.
LΩGIC Wall Panel 16- Port QRG Rev. 1