1. Manuals
  2. Brands
  3. Lanner Manuals
  4. Server
  5. ICS-I370
  6. User manual

Lanner ICS-I370 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
ICS-I370 User Manual
Industrial Communication Platforms
ICS-I370 User Manual
Preliminary Draft
Version: 1.3
Date of Release:2023-07-10

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ICS-I370 and is the answer not in the manual?

Questions and answers

Related Manuals for Lanner ICS-I370

Summary of Contents for Lanner ICS-I370

  • Page 1 ICS-I370 User Manual Industrial Communication Platforms ICS-I370 User Manual Preliminary Draft Version: 1.3 Date of Release:2023-07-10...
  • Page 2 - assumed to be qualified in the servicing of computer equipment, such as professional system integrators, or service personnel and technicians. The latest version of this document can be found on Lanner’s official website, available either through the product page or through the Lanner Download Center page with a login account and password.
  • Page 3 ICS-I370 User Manual Taiwan Corporate Headquarters China Lanner Electronics Inc. Beijing L&S Lancom Platform Tech. Co., Ltd. 7F, No.173, Sec.2, Datong Rd. Guodong LOFT 9 Layer No. 9 Huinan Road, Xizhi District, New Taipei City 22184, Huilongguan Town, Changping District, Beijing...
  • Page 4 ICS-I370 User Manual This document is copyrighted © 2023 by Lanner Electronics Inc. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of the original manufacturer.
  • Page 5 ICS-I370 User Manual Follow these guidelines to ensure general safety: Keep the chassis area clear and dust-free during and after installation. Do not wear loose clothing or jewelry that could get caught in the chassis. Fasten your tie or scarf and roll up your sleeves.
  • Page 6 ICS-I370 User Manual L’équipement électrique génère de la chaleur. La température ambiante peut ne pas être adéquate pour refroidir l’équipement à une température de fonctionnement acceptable sans circulation adaptée. Vérifiez que votre site propose une circulation d’air adéquate. Vérifiez que le couvercle du châssis est bien fixé. La conception du châssis permet à l’air de refroidissement de bien circuler.
  • Page 7 ICS-I370 User Manual Before turning on the device, ground the grounding cable of the equipment. Proper grounding (grounding) is very important to protect the equipment against the harmful effects of external noise and to reduce the risk of electrocution in the event of a lightning strike. To uninstall the equipment, disconnect the ground wire after turning off the power. A ground wire is required and the part connecting the conductor must be greater than 4 mm2 or 10 AWG.
  • Page 8 ICS-I370 User Manual Key Features ..........................9 Package Content ........................... 9 Ordering Information ........................9 System Specifications ......................... 10 Physical Overview ........................11 Motherboard Information ......................13 Opening the Bottom Chassis ...................... 25 Opening the Top Chassis ......................27 Installing the System Memory ....................29 Installing the mSATA Storage (Optional) ..................
  • Page 9 ICS-I370 User Manual ICS-I370 is the next-generation compact fanless industrial cyber security appliance with Intel® Atom™ E3900 CPU (Apollo Lake). Deployed in remote, unmanned, and harsh environments, ICS-I370 supports rich LAN ports with advanced Gen3 LAN bypass, SFP, and extended operating temperature from -40º C to 70º C. It...
  • Page 10 ICS-I370 User Manual SKU A/B/C/D: Intel® Atom™ E3950 Processor Options SKU E/F: Intel® Atom™ E3940 Frequency 1.60 GHz Processor System Core Number Chipset BIOS AMI SPI Flash BIOS Technology DDR3L, non ECC Memory Max. Capacity Up to 8GB Socket 1x SODIMM LAN3 &...
  • Page 11 ICS-I370 User Manual Description LED Indicator: Power Status/ Storage Access/ SFP Status/ LTE Status LED Indicators 4x LTE Signal Level Status 2x4 Programmable Console Port 1x DB9 Console Port USB Port 2x USB 3.0 Type A Ports SKU A/B: 8x GbE RJ45 (1 or 2 pair bypass) Ports SKU C/D: 6x GbE RJ45;...
  • Page 12 ICS-I370 User Manual Description Power Input 1x 2-pin Terminal Block for Dual DC input 12~36V (Typical 12V/24Vdc) Antenna 2x Antenna Holes Description Power Control 1x 2-pin Terminal Block for Power On/Off Control Reset Button 1x Reset Button. Use a pin to reset the system...
  • Page 13 ICS-I370 User Manual...
  • Page 14 ICS-I370 User Manual The pin headers on the motherboard are often associated with important functions. With the shunt (Jumper) pushed down on the designated pins (the pin numbers are printed on the circuit board, surrounding the pin header), certain feature can be enabled or disable. When changing the jumpers, make sure your system is completely turned off.
  • Page 15 ICS-I370 User Manual 5. JSPI1: SPI ROM Connector (For RD Debug) Pin No. Description Pin No. Description SPI0_HOLD_N SPI0_CS_N V1P8_A_SPI SPI0_MISO_R SPI0_CLK SPI0_MOSI 6. LPC1: LPC Connector (For RD Debug) Pin No. Description Pin No. Description DEBUG_CLK_24M LPC_AD1 PLTRST_BUF2_N LPC_AD0...
  • Page 16 ICS-I370 User Manual 10. USB1: Dual USB 3.0 Type A Connector Pin No. Description Pin No. Description V5S_USB3_1 V5S_USB3_2 USB2_0- USB2_1- USB2_0+ USB2_1+ USB3_R0- USB3_R1- USB3_R0+ USB3_R1+ USB3_T0- USB3_T1- USB3_T0+ USB3_T1+ 13. RJ1: LAN 1/2 Connector Pin No. Description Pin No.
  • Page 17 ICS-I370 User Manual LAN3_L100_N LAN3_L1000_N P3V3_LAN3 LAN3_ACTLED_N 15. RJ4: LAN 10/100/1000 RJ45 Connector Pin No. Description LAN4_MDI0P LAN4_MDI0N LAN4_MDI1P LAN4_MDI1N P1V5_LAN4 P1V5_LAN4 LAN4_MDI2P LAN4_MDI2N LAN4_MDI3P LAN4_MDI3N LAN4_L100_N LAN4_L1000_N P3V3_LAN4 LAN4_ACTLED_N 16. FIBER1: SFP Connector Pin No. Description Pin No. Description...
  • Page 18 ICS-I370 User Manual SFP4_TX_DIS SFP4_RD_P SFP4_I2C_SDA SFP4_I2C_SCL P3V3_SFP4_R SFP4_MOD_ABS P3V3_SFP4_T SFP4_RS0 SFP4_RX_LOS SFP4_TD_P SFP4_RS1 SFP4_TD_N 18. MSATA1: MSATA Connector Pin No. Description Pin No. Description V3P3_S Mechanical Key SATA_RXP0_C V3P3_S SATA_RXN0_C SATA_TXN0_C SATA_TXP0_C V3P3_S V3P3_S V3P3_S...
  • Page 19 ICS-I370 User Manual 19. PSBTN1: External Power Button (2-pin Phoenix Connector) Pin No. Description Pin No. Description EXT_PWRBTN 20. JP10: Board to Board Power Connector Pin No. Description Pin No. Description V12_A V12_A V12_A V12_A V12_A 21. J9: Board to Board Connector...
  • Page 20 ICS-I370 User Manual 1. RJ2: RJ45 Jack with LED Pin No. Description LAN1_MDI0P LAN1_MDI0N LAN1_MDI1P LAN1_MDI1N TCL1 TCL2 LAN1_MDI2P LAN1_MDI2N LAN1_MDI3P LAN1_MDI3N LAN1_LINK_2500_N LAN1_LINK_1000_N LAN1_LINK_ACT_N P3V3_LAN1 2. RJ3: RJ45 Jack with LED Pin No. Description LAN2_MDI0P LAN2_MDI0N LAN2_MDI1P LAN2_MDI1N TCL1...
  • Page 21 ICS-I370 User Manual P3_MDXP1 P4_MDXP1 P3_MDXP2 P4_MDXP2 P3_MDXN2 P4_MDXN2 P3_MDXN1 P4_MDXN1 P3_MDXP3 P4_MDXP3 P3_MDXN3 P4_MDXN3 V3P3_S V3P3_S LAN3_LINK_ACT_N LAN4_LINK_ACT_N LAN3_LINK_1000_N LAN4_LINK_1000_N LAN3_LINK_2500_N LAN4_LINK_2500_N 4. DIO1: DIO Connector Pin No. Description Pin No. Description I_COM DI_0 DO_0 DI_1 DO_1 5. M2_1: M.2 NGFF Connector (B-Key) Pin No.
  • Page 22 ICS-I370 User Manual V3P3_G1 V3P3_G1 V3P3_G1 6. SIM1: SIM Card Socket Pin No. Description Pin No. Description UIM1_PWR UIM1_RST1 UIM1_CLK1 UIM1_DAT1 7. SIM2: SIM Card Socket Pin No. Description Pin No. Description UIM1_PWR2 UIM1_RST2 UIM1_CLK2 UIM1_DAT2 8. M2_E_KEY1: M.2 NGFF Connector (E-Key) Pin No.
  • Page 23 ICS-I370 User Manual LED_WLAN2- SW_C_PCIE_TX_P5 SW_C_PCIE_TX_N5 SW_C_PCIE_TX_N5 SW_C_PCIE_RX_N5 CLK_LAN5_DP CLK_LAN5_DN PERST#EKEY V3P3_S V3P3_S 9. J2: Board to Board Connector Description Description Description Description V3P3_S P1_S0_2 CTS#2 LAN34GND USB2_DP4 RTS#2 USB2_DP3 USB2_DN4 SOUT#2 USB2_DN3 CTS#3 SIN#2 RTS#3 PCIE5_TXP USB3_TX3_P SOUT#3...
  • Page 24 ICS-I370 User Manual PCIE5_TXN CTS#4 USB3_TX3_N SIN#3 RTS#4 PCIE5_RXP SOUT#4 USB3_RX3_P CTS#5 PCIE5_RXN SIN#4 USB3_RX3_N RTS#5 SOUT#5 BUF_PCIE5_CLKP SOUT#6 BUF_PCIE4_CLKP SIN#5 BUF_PCIE5_CLKN SIN#6 BUF_PCIE4_CLKN V5_S PLTRST_BUF3_N V3P3_S V3P3_S LATCH_EN_GPH V3P3_S LATCH_DIS_GPL V5_S GPIO_BYPASS_EN V3P3_A SMB_CLK_BUF2 P1_RT_1 SMB_DATA_BUF2 V5_S P1_S0_1 V12_S 10.
  • Page 25 ICS-I370 User Manual To reduce the risk of personal injury, electric shock, or damage to the system, please remove all power connections to shut down the device completely. Also, please wear ESD protection gloves when conducting the steps in this chapter.
  • Page 26 ICS-I370 User Manual 4. Lift the cover to remove.
  • Page 27 ICS-I370 User Manual To install the system memory and optional mSATA storage card expansion, we need to access the bottom (second layer) section of the system. 1. Power off the system and remove the bottom chassis cover. Top Chassis Cover 2.
  • Page 28 ICS-I370 User Manual 4. Gently remove the top chassis cover from the motherboard layers. 5. Remove the six (6) screws on the top motherboard section. 6. Remove the two (2) screws on the metal partition on the side and lift up the metal partition.
  • Page 29 ICS-I370 User Manual The system supports one system memory slot, please follow the steps for installation. 1. Power off the system, and open the top and bottom chassis cover, and remove the top motherboard layer. Locate a metal partition covering the DIMM socket placement.
  • Page 30 ICS-I370 User Manual 6. Next, thermal pad placement. Remove the protective film on the thermal pad (included in the accessory pack) and gently place on the metal partition. 7. Then place the metal partition over the DIMM module, and secure with two (2) screws.
  • Page 31 ICS-I370 User Manual The system supports one mSATA slot. Follow the procedures below for installing a mSATA storage module card. 1. Power off the system, and open the top and bottom chassis cover, and remove the top motherboard layer. Locate the metal partition covering the DIMM socket placement on the bottom (second layer) motherboard.
  • Page 32 ICS-I370 User Manual 5. Push down on the module card and secure it with two (2) screws. 6. Next, thermal pad placement. Remove the protective film on the thermal pad (included in the accessory pack) and gently place on the metal partition.
  • Page 33 ICS-I370 User Manual The motherboard provides one M.2 E-Key slot for a Wi-Fi module card. Wi-Fi module requires two antennas. Please follow the procedures for installation. 1. Power off the system and remove the bottom chassis cover. Locate the M.2 slot on the (top) motherboard.
  • Page 34 ICS-I370 User Manual Top Panel 1. Locate the two (2) antenna hole placements (A1, A2). Locate the two (2) IPEX connectors on the Wi-Fi module card. 2. Connect the RF cables to the IPEX connectors on the Wi-Fi module card and screw the other end of the cable in the antenna holes.
  • Page 35 Note: 5G module requires the metal partition and thermal pad to sufficiently dissipate heat. The metal partition blocks the SSD cables, therefore ICS-I370 system cannot support both 5G module and SSD expansion at the same time. LTE module does NOT require the metal partition and thermal pad to sufficiently dissipate heat, therefore, ICS-I370 system supports both LTE and SSD expansion.
  • Page 36 ICS-I370 User Manual 5. Next, thermal pad placement. Remove the protective film on the thermal pad (included in accessory pack) and gently place on the larger square piece on the bottom chassis cover (which once covered, will be placed over LTE/5G module card).
  • Page 37 ICS-I370 User Manual ㄉ ㄉ 3. Then, screw on the four antennas to the system.
  • Page 38 ICS-I370 User Manual 1. The dual-SIM card slot is located right next to the LTE/5G module card. 2. Insert and push the SIM card, gold contacts facing downwards, all the way in until it clicks into place. Repeat if dual SIM cards will be placed.
  • Page 39 ICS-I370 User Manual The system supports one 2.5” HDD/SSD slot (SSD preferred) drive bay. The following will discuss disk drive installation procedures. Note: The system only supports LTE module and HDD/SSD expansion at the same time. The system does NOT support 5G module and HDD/SSD expansion at the same time, due to cable port accessibility.
  • Page 40 ICS-I370 User Manual 4. Insert the SATA cables to the SATA contact on the disk. 5. Place the bracket holder on the bracket and secure with two (2) screws. 6. Place the bracket (with installed SSD) on the chassis cover, secure with four (4) screws.
  • Page 41 ICS-I370 User Manual The system can be mounted via DIN Rail method with an optional DIN Rail kit. 1. Attach the DIN rail bracket to the rear of the system with three (3) screws. 2. Hang the system onto a rail by engaging the hook of the Bracket into the DIN Rail until it is totally fixed.
  • Page 42 ICS-I370 User Manual To enter the BIOS setup utility, follow the steps below: 1. Boot up the system. 2. Pressing the <Tab> or <Del> key immediately allows you to enter the Setup utility, then you will be directed to the BIOS main screen. The instructions for BIOS navigations are as below:...
  • Page 43 ICS-I370 User Manual Setup main page contains BIOS information and project version information. Item Description BIOS Vendor: American Megatrends Core Version: AMI Kernel version, CRB code base, X64 Compliancy: UEFI version, PI version BIOS Information Project Version: BIOS release version...
  • Page 44 ICS-I370 User Manual Select the Advanced menu item from the BIOS setup screen to enter the “Advanced” setup screen. Users can select any of the items in the left frame of the screen.
  • Page 45 ICS-I370 User Manual...
  • Page 46 ICS-I370 User Manual Feature Options Description Enables or disables BIOS support for security device. By Security Device Enabled disabling this function, OS will not show Security Device. TCG Support Disabled EFI protocol and INT1A interface will not be available. Enabled SHA-1 PCR Bank Enables or disables SHA-1 PCR Bank.
  • Page 47 ICS-I370 User Manual...

  • Page 48: Serial Port 1 Configuration

    ICS-I370 User Manual Serial Port1 Configuration Feature Options Description Enabled Serial Port Enables or disables Serial Port 1. Disabled Device Settings IO=3F8h; IRQ = 4 COM1 MODE RS232 Select Com Mode as RS232...
  • Page 49 ICS-I370 User Manual Item Description CPU Temp This value reports the CPU temperature. SYS Temp This value reports the System temperature. VCORE This value reports the CPU VCORE. This value reports the 12V Input voltage This value reports the 5V Input voltage.
  • Page 50 ICS-I370 User Manual Feature Options Description Enabled Watch Dog Timer Enable or Disable Watch Dog function Disabled...
  • Page 51 ICS-I370 User Manual Feature Options Description Output High Digital I/O Pin 1 Configure Digital I/O Pin High or Low Output Low Output High Digital I/O Pin 2 Configure Digital I/O Pin High or Low Output Low Output High Digital I/O Pin 3...
  • Page 52 ICS-I370 User Manual Feature Options Description Output High DI0 LED Configure DIO LED High or Low Output Low Output High DI1 LED Configure DIO LED High or Low Output Low Output High DI2 LED Configure DIO LED High or Low...
  • Page 53 ICS-I370 User Manual Feature Options Description Output High LTE_Y Configure LTE_Y LED High or Low Output Low Output High LTE_G Configure LTE_G LED High or Low Output Low Output High LTE_R Configure LTE_R LED High or Low Output Low Output High...
  • Page 54 ICS-I370 User Manual Feature Options Description COM0 Enabled Enables or disables Console Redirection Console Redirection Disabled...

  • Page 55: Console Redirection Settings

    ICS-I370 User Manual Console Redirection Settings Feature Options Description ANSI: Extended ASCII char set. VT100 VT100: ASCII char set. VT100+ Terminal Type VT100+: Extends VT100 to support color, function keys, etc. VT-UTF8 VT-UTF8: Uses UTF8 encoding to map Unicode chars onto 1 ANSI or more bytes.
  • Page 56 ICS-I370 User Manual VT-UTF8 Combo Disabled Enable VT-UTF8 Combination Key Support for ANSI/VT100 Key Support Enabled terminals Disabled With this mode enabled only text will be sent. This is to Recorder Mode Enabled capture Terminal data. Disabled Resolution 100x31 Enables or disables extended terminal resolution.
  • Page 57 ICS-I370 User Manual Legacy Console Redirection Setting Feature Options Description Redirection Select a COM port to display redirection of Legacy OS and COM0 COM Port Legacy OPROM Messages 80x24 On Legacy OS, the Number of Rows and Columns Resolution 80x25...
  • Page 58 ICS-I370 User Manual Feature Options Description Intel Virtualization Disabled When enabled, a VMM can utilize the additional hardware Technology Enabled capabilities provided by Vanderpool Technology Disabled VT-d Enable/Disable CPU VT-d Enabled When a processor thermal sensor trips (either core), the...

  • Page 59: Socket 0 Cpu Information

    ICS-I370 User Manual Socket 0 CPU Information...

  • Page 60: Cpu Power Management

    ICS-I370 User Manual CPU Power Management Feature Options Description Disabled EIST Enable/Disable Intel SpeedStep Enabled...
  • Page 61 ICS-I370 User Manual AMI Graphic Output Protocol Policy Feature Options Description Output Select Output Interface (detected)
  • Page 62 ICS-I370 User Manual Feature Options Description Globally Enables or Disables 64bit capable Devices to be Disabled Above 4G Decoding Decoded in Above 4G Address Space (Only if System Enabled Supports 64 bit PCI Decoding). Disabled Re-enable Bus Master Attribute disabled during Pci...
  • Page 63 ICS-I370 User Manual Feature Options Description Enables Legacy USB support. Enabled Auto option disables legacy support if no USB devices are Legacy USB Support Disabled connected; Auto Disabled option will keep USB devices available only for EFI applications. Enabled This is a workaround for OSes without XHCI hand-off support.
  • Page 64 ICS-I370 User Manual Feature Options Description Disabled CSM Support Enables or disables CSM Support Enabled Do Not Launch Network UEFI Controls the execution of UEFI and Legacy PXE OpROM Legacy Do Not Launch Controls the execution of UEFI and Legacy Storage...
  • Page 65 ICS-I370 User Manual...
  • Page 66 ICS-I370 User Manual Feature Options Description Disabled Control Legacy PXE LAN1 Control Legacy PXE Boot from which Lan Boot from LAN2...
  • Page 67 ICS-I370 User Manual Select the Chipset menu item from the BIOS setup screen to enter the “Chipset” setup screen. Users can select any of the items in the left frame of the screen.
  • Page 68 ICS-I370 User Manual Feature Options Description 2 GB 2.25 GB Max TOLUD 2.5 GB Maximum Value of TOLUD. 2.75 GB 3 GB Enable/Disable above MemoryMappedIO BIOS Above 4GB MMIO Enabled assignment This is disabled automatically when Aperture Size BIOS assignment...
  • Page 69 ICS-I370 User Manual Feature Options Description Quiet Serial IRQ Mode Configure Serial IRQ Mode. Continuous Windows Android OS Selection Select the target OS Win7 Intel Linux...
  • Page 70 ICS-I370 User Manual...

  • Page 71: Sata Drives

    ICS-I370 User Manual SATA Drives...
  • Page 72 ICS-I370 User Manual Feature Options Description Aggressive LPM Enabled Enable PCH to aggressively enter link power state. Support Disabled Enabled Port 0 Enable or Disable SATA Port Disabled SATA Port 0 Enabled If enabled, SATA port will be reported as Hot Plug capable.

  • Page 73: Usb Configuration

    ICS-I370 User Manual USB Configuration Feature Options Description Once disabled, XHCI controller would be function disabled, none of Enable xHCI Mode the USB devices are detectable and usable during boot and in OS. Do Disable not disable it unless for debug purpose.

  • Page 74: Miscellaneous Configuration

    ICS-I370 User Manual Miscellaneous Configuration Feature Options Description Specify what state to go to when power is re-applied after a power Power On Restore AC failure (G3 state). S0 State: System will boot directly as soon as power Power Off Power Loss applied.
  • Page 75 ICS-I370 User Manual Select the Security menu item from the BIOS setup screen to enter the Security Setup screen. Users can select any of the items in the left frame of the screen. Feature Description Setup Administrator If ONLY the Administrator's password is set, it only limits access to Password Setup and is only asked for when entering Setup.

  • Page 76: Secure Boot

    ICS-I370 User Manual Secure Boot Feature Options Description Disabled Secure Boot is activated when Platform Key (PK) is enrolled, System Secure Boot Enabled mode is User/Deployed, and CSM function is disabled. Secure Boot Mode - Custom & Standard, Set UEFI Secure Boot Mode...

  • Page 77: Key Management

    ICS-I370 User Manual Key Management Feature Options Description Factory keys Disabled Allow to provision factory default Secure Boot keys when System is Provision Enabled in Setup Mode Restore None Force System to User Mode - install all Factory Default keys Factory keys Allows the image to run in Secure Boot mode.
  • Page 78 ICS-I370 User Manual Select the Boot menu item from the BIOS setup screen to enter the Boot Setup screen. Users can select any of the items in the left frame of the screen. Feature Options Description The number of seconds to wait for setup activation key.
  • Page 79 ICS-I370 User Manual Select the Save and Exit menu item from the BIOS setup screen to enter the Save and Exit Setup screen. Users can select any of the items in the left frame of the screen. ■ Discard Changes and Exit Select this option to quit Setup without saving any modifications to the system configuration.
  • Page 80 IIOT-I330 User Manual ■ Restore Defaults Restore default values for all setup options. Select “Yes” to load Optimized defaults. Note The items listed under Boot Override will depend on the devices connected to this system.
  • Page 81 IIOT-I330 User Manual 1. All products are under warranty against defects in materials and workmanship for one year from the date of purchase. 2. The buyer will bear the return freight charges for goods returned for repair within the warranty period; whereas the manufacturer will bear the after service freight charges for goods returned to the user.
  • Page 82 IIOT-I330 User Manual When requesting RMA service, please fill out the following form. Without this form enclosed, your RMA cannot be processed.

Table of Contents