Table of Contents
Advertisement
Button's introduction
5
▼/▲ button
After each pressing of "▲" or "▼" button, set temperature will increase or decrease
16
~30
. This button is invalid under
auxiliary heating function setting through Function button,press this button to turn on or turn off auxiliary heating. (Note: auxiliary
heating is valid only for the model with this function.)
Hold "▲" and "▼" buttons for 3s and the air conditioner will display "LC", which indicates buttons are locked. Any button
under on status or ON/OFF button and function buttons under off status are all invalid. Hold these two button for 3s
again to release the lock.
6
/
button
Left and right swing: this button controls the left and right swing motor, single pressit to switchover between ON and OFF.
Up and down swing: this button controls the up and down swing motor, single pressit to switchover between ON and OFF.
Icon function introduction
Operation display
It indicates the air conditioner is
put through the power. Under on
status, this indicator is on; under
off status, this indicator is off.
Timer display
When this indicator is on, it
indicates the timer function
is turned on.
Heating display
When this indicator is on, it
indicates the heating mode is
turned on.
Defrosting display
When this indicator is on, it
indicates the defrosting function
is turned on.
14
auto mode. Timer setting can be set in 1h increment among 0~24h. When it is adjusted to
Dry display
When this indicator is on, it indicates
the dry mode is turned on.
E-Heater display
When this indicator is on, it indicates
the E-heater function is turned on.
Cooling display
When this indicator is on, it indicates
the cooling mode is turned on.
Fan display
When this indicator is on, it indicates
the fan mode is turned on.
Displays the fan speed. The fan speed
is displayed as below:
(low) →
(high) →
. Temperature adjustment range is
1
Fan speed display
(medium) →
(turbo)
Technical Information
Service Manual
Advertisement
Table of Contents
