Ryobi RBV3600 Instructions Manual page 20

OPERATION
5. Guide the vacuum bag opening over the
bag adaptor and then snap the rear side
of the bag to secure it in place. Hook the
vacuum bag to the lower blower tube.
6. Hook the harness to the front handle.
7. At the rear side of the housing, insert the
battery pack until you hear an audible
click and the battery locks into place.
Set the mode selection lever to the top
position to set the product to vacuum
mode.
8. Squeeze the trigger to operate the
product. Use the cruise control lever to
lock the product to the desired power.
NOTE: Do not vacumm damp leaves
and debris, water and liquids, twigs or
barks, tough plants, gravel, stones, and
rocks. This may result in damage to the
product.
18
5
6
1
7
1
8
2
1
2
1
2
2