Front Alignment Plate Home Position Sensor (S4); Rear Alignment Plate Home Position Sensor (S5) - Oki MJ-1038 Service Manual

4.2.5 Front alignment plate home position sensor (S4)

(1) Take off the Finisher control PC board
ASSY. ( P.4-45 "4.5.1 Finisher control
PC board ASSY")
(2) Remove 1 e-ring [1], and remove main
paddle flag [2].
(3) Disconnect 1 connector [3] and then
take off the front alignment plate home
position sensor [4].

4.2.6 Rear alignment plate home position sensor (S5)

(1) Take off the Guide upper ASSY.
( P.4-3 "4.2.1 Guide upper ASSY")
(2) Remove 1 e-ring [1], and remove main
paddle flag [2].
45372301TH Rev.1
Oki Data CONFIDENTIAL
[2]
[1]
Fig. 4-15
[3]
[4]
Fig. 4-16
[2]
[1]
Fig. 4-17
4-7 /