2-3-5 FCH Common Options
Parameter
FCH Common Options
SATA Configuration Options
AC Power Loss Options
FCH RAS Options
Description
Press [Enter] for configuration of advanced items.
SATA Enable
– Enable/Disable OnChip SATA controller.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
SATA Controller options
– Press [Enter] for configuration of advanced items.
Press [Enter] for configuration of advanced items.
AC Loss Control
– Selects the AC Loss Control Method.
– Options available: Power Off, Power On, Last State. Default setting
is Last State.
Press [Enter] for configuration of advanced items.
ALink RAS Support
– Enable/Disable the ALink RAS Support.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Reset after sync flood
– Enable/Disable AB to forward downstream sync-flood message to
system controller.
– Options available: Auto, Enable, Disable. Default setting is Auto.
BIOS Setup
- 76 -