Table of Contents
Advertisement
Parameter
NBIO RAS Common
Options (continued)
Enable AER Cap
Description
NBIO SyncFlood Reporting
Š
– The value may be used to enable SyncFlood reporting to APML.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Egress Poison Mask High
Š
– Enables mask for masking of errors logged in EGRESS_POISON_
STATUS. For each bit set to 1, errors are masked. For each bit set to 0,
errors trigger response actions.
Egress Poison Mask Low
Š
– Enables mask for masking of errors logged in EGRESS_POISON_
STATUS. For each bit set to 1, errors are masked. For each bit set to 0,
errors trigger response actions.
Uncorrected Converted to Poison Enable Mask High
Š
– Enables mask for masking of uncorrectable parity errors on internal
arrays.
Uncorrected Converted to Poison Enable Mask Low
Š
– Enables mask for masking of uncorrectable parity errors on internal
arrays.
System Hub Watchdog Timer
Š
– Specifies the timer interval of the SYSHUB Watchdog timer in
milliseconds.
SLINK Read Response OK
Š
– This item specifies whether SLINK read response errors are converted
to an Okay response.
– Options available: Enabled, Disabled. Default setting is Disabled.
SLINK Read Response Error Handling
Š
– Options available: Enabled, Trigger MCOMMIT Error, Log Errors in
MCA. Default setting is Log Errors in MCA.
Log Poison Data from SLINK
Š
– Enable/Disable the Log Poison Data from SLINK feature.
– Options available: Enabled, Disabled. Default setting is Disabled.
PCIe Aer Reporting Mechanism
Š
– Selects the method of reporting AER errors from PCI Express.
– Options available: Auto, Firmware First, OS First, MCA. Default setting
is Auto.
Edpc Control
Š
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
NBIO Poison Consumption
Š
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
Sync Flood on PCIe Fatal Error
Š
– Options available: Auto, True, False. Default setting is Auto.
Enable/Disable Advanced Error Reporting Capability.
Options available: Auto, Enable, Disabled. Default setting is Auto.
BIOS Setup
- 74 -
Advertisement
Table of Contents
