Table of Contents
Advertisement
1-7
Back Panel Connectors
1
VGA Port
1
Connect to a monitor device.
ID button with LED
2
When the system identification is active, the ID LED on the front/ back panel glows blue.
USB 3.2 Type-A Port
3
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
USB 3.2 Type-C Port
4
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
GbE LAN Port
5
The Gigabit Ethernet LAN port provides Internet connection at up to 1 Gbps data rate. See the section
below for a description of the states of the LAN port LEDs.
USB 3.2 Ports
6
The USB port supports the USB 3.2 specification. Use this port for USB devices such as a USB
keyboard/mouse, USB printer, USB flash drive etc.
10/100/1000 Server Management LAN Port
7
The LAN port provides Internet connection with data transfer speeds of 10/100/1000Mbps. This port is
the dedicated LAN port for Server Management.
Line In Jack (Blue)
8
The default Line in jack. Use this audio jack for line in devices such as an optical drive, walkman, etc
Line Out Jack (Green)
9
The default Line Out jack. Use this audio jack for a headphone or 2-channel speaker. This jack can be
used to connect front speakers in a 4/5.1/7.1-channel audio configuration.
Mic In Jack (Pink)
10
The default MIC In jack. A microphone can be connected to the MIC In jack.
5
3
2
6
4
Hardware Installation
- 15 -
7
6
8
9
10
Advertisement
Table of Contents
