Parameter
SMU Common Options
(continued)
NBIO RAS Common
Options
Description
Fan Control
– Press [Enter] for configuration of advanced items.
– Fan Table Control
» Options available: Auto, Manual. Default setting is Auto.
EfficiencyModeEn
– Options available: Auto, Enabled. Default setting is Auto.
Package Power Limit Control
– Selects use the fused PPT or set customized PPT. **PPT will be used
as the ASIC power limit**
– Options available: Auto, Manual. Default setting is Auto.
APBDIS
– Options available: Auto, 0, 1. Default setting is Auto.
DF Cstates
– Enable/Disable DF C-states.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
CPPC
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
CPPC Preferred Cores
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
NBIO LCLK DPM
– Press [Enter] for configuration of advanced items.
– NBIO DPM Control
» This setting controls how the NBIO Power Management is controlled.
» Options available: Auto, Manual. Default setting is Auto.
Press [Enter] for configuration of advanced items.
NBIO RAS Global Control
– Options available: Auto, Manual. Default setting is Auto.
NBIO RAS Control
– Options available: Disabled, MCA, Legacy. Default setting is MCA.
Egress Poison Severity High
– Configures the Egress Poison High Severity. Each bit set to 1 enables
High severity on the associated IOHC egress port. A bit of 0 indicates
LOW severity.
Egress Poison Severity Low
– Configures the Egress Poison Low Severity. Each bit set to 1 enables
High severity on the associated IOHC egress port. A bit of 0 indicates
LOW severity.
NBIO SyncFlood Generation
– The value may be used to mask SyncFlood caused by NBIO RAS
options.
– Options available: Auto, Enabled, Disabled. Default setting is Auto.
BIOS Setup
- 73 -