Cloud CXA2125 Quick Start Manual

Carton Contents

• Mains power cable
• Input connector x 2
• GPIO socket connector

Connection Sockets

Network
Control GPIO
Optional
Dante AoIP

Installation Notes

• High or low impedance speaker connection options can be selected
web interface.
• Analogue input sensitivity can be adjusted independently for each

Wireless Network Control Connection

A mobile, laptop or desktop device with WiFi functionality and a
web browser is required.
Follow the steps below.
1.
cable and wait for the front panel WiFi indicator to illuminate green.
2. Use a mobile, laptop or desktop device to search for available
WiFi networks. Connect to, 'Cloud (product serial number)' using the
rear panel.
3. Open a mobile, laptop or desktop device web browser and enter
is changed following initial wireless connection.
QUICK START GUIDE
CXA SERIES DIGITAL AMPLIFIERS
MODELS: CXA125 / CXA2125 / CXA250 / CXA2250
• Output connector x 1 or 2
• Adhesive rubber feet x 4
• Document pack
S/PDIF Audio I/O
Support
• A full user Manual & additional documentation is available online:
CXA125 CXA250
Audio Inputs
Balanced: Euroblock - Unbalanced: RCA Phono.
Output
important to ensure that the 40°C maximum operating temperature
for the equipment is not exceeded.

Wired Network Control Connection

A laptop or desktop device with Ethernet functionality, a web
browser and a network scanning app is required.
Follow the steps below.
1.
on a network router or network switch using an Ethernet cable.
2.
cable and wait for the front panel Network indicator to illuminate
3. Use a network scanner app to identify the IP address assigned by
4. Open a laptop or desktop device web browser and enter the IP
CXA2125 CXA2250