Cloud CXA Series Quick Start Manual

Carton Contents
• Mains power cable
• Input connector x 2
Connection Sockets
Network
Control GPIO
Installation Notes
•
Standby button. Do not switch on until all required signal and
control connections are made.
• High or low impedance speaker connection options can be selected
app
• Analogue input sensitivity can be adjusted independently for each
Wireless Network Control Connection
A mobile, laptop or desktop device with WiFi functionality and a
web browser is required.
Follow the steps below.
1.
supplied mains cable and switch it on via the front panel Standby
switch. Wait for the front panel WiFi indicator to illuminate green.
2. Use a mobile, laptop or desktop device to search for available WiFi
networks. Connect to, '[Amp Name] (product serial number)' using the
rear panel.
3. Open a mobile, laptop or desktop device web browser and enter
changed following initial wireless connection.
QUICK START GUIDE
CXA SERIES DIGITAL AMPLIFIERS
MODELS: CXA21K & CXA215K
• Output connector x 1 or 2
• Adhesive rubber feet x 4
• Document pack
• GPIO socket connector
S/PDIF Audio I/O
Support
• A full user Manual & additional documentation is available online:
CXA21K
Audio Inputs
Balanced: Euroblock
Unbalanced: RCA Phono.
Outputs
•
•
•
Wired Network Control Connection
A laptop or desktop device with Ethernet functionality, a web
browser and a network scanning app is required.
Follow the steps below.
1.
to a laptop or desktop device - or through a switch.
2.
supplied mains cable and and switch it on via the front panel Standby
switch. Wait for the front panel Network indicator to illuminate green
3.
same IP range, ex. 192.168.64.10, with Subnet mask 255.255.255.0 (or
4. Open a laptop or desktop device web browser and enter the
CXA215K
Mains
Power Input