Advertisement
2. What to check before using:
(1) Ensure the power cord is not damaged.
(2) Ensure the power source matches the electrical requirements stated on the heater
nameplate. Also make sure that it has safety grounding - if not, the outlet must be replaced.
Display board
Remote receiver
If the display board is not showing anything, check the power cord and ensure the power
source is switched on.
Figure 2: Castor plate installation diagramme
Boot
Increase
Decrease
Mode
Time
Temperature
Advertisement
Need help?
Do you have a question about the 820-260V70 and is the answer not in the manual?
Questions and answers