5.8 Exit Ass'y
1. Before you remove Exit Ass'y, you should remove:
- Rear Cover (see page 5-1)
- Scanner Ass'y (see page 5-2)
2. Remove three screws, and then untie the harness
from the Exit Upper. Unplug one connector from the
Main PBA and unlatch the Dummy Base Frame using
a flat blade screwdriver, as shown below.
5.9 Cover Paper Exit Ass'y
1. Before you remove the Cover Paper Exit Ass'y, you
should remove:
- Rear Cover (see page 5-1)
- Scanner Ass'y (see page 5-2)
Samsung Electronics
3. Lift the exit ass'y and remove it.
2. Remove two screws and Cover Paper Exit Ass'y, as
shown below.
Cover Paper Exit Ass'y
Service Manual
5-15