Table of Contents
Advertisement
INSTALLATION
Install and uninstall the sensor controller
a. Install the sensor controller box.
b. Install the screw.
c. Connect the sensor wire.
Install and uninstall the Fixture, Valve
Assembly
Unscrew the screws on the Fixture, Valve Assembly. Remove
the Fixture, Valve Assembly from the urinal by moving it.
Install the Greeting light Assembly
(For K-21841T-WEW/K-21841T-EW/K-
21841T-YXEW)
Install the screw screwing in ceramic hole with hexagonal nut
locking, then the mounting bracket with lock nut installed,
after greeting light power connection to observe on the
ground icon is in accordance with the recommended size,
such as is not in conformity with the loosen locking nut can
adjust bracket that icon to recommended size.
Notes:
Light icon size reference value.
(Must be Recommended dimensions for installation)
1323700-T01-B
Nut
Connector
Bracket
Connector
Connector
149 10mm
505 20mm
a.
b.
c.
(K-21841T-WEW/K-21841T-EW/K-21841T-
YXEW
)
Hex Nut
Connector
Fig.3
3
Fig.4
4
-5-
Control Box
Advertisement
Table of Contents
