Dell PowerEdge R250 VN927 Installation And Service Manual page 45

Table 13. Cable routing - 4 x 3.5-inch cabled drive configuration
From
HDD0 (HDD0 signal connector)
HDD1 (HDD1 signal connector)
HDD2 (HDD2 signal connector)
HDD3 (HDD3 signal connector)
Power connector on HDD0, HDD1, HDD2, and HDD 3
ODD (Optical Disk Drive) connector
Figure 37. Cable routing - 4 x 3.5-inch cable drive configuration with PERC
Table 14. Cable routing - 4 x 3.5inch cable drive configuration with PERC
From
HDD0 (HDD0 signal connector)
HDD1 (HDD1 signal connector)
HDD2 (HDD2 signal connector)
HDD3 (HDD3 signal connector)
Power connector on HDD0, HDD1, HDD2, and HDD 3
ODD (Optical Disk Drive) connector
To
SL1_PCH_SA1 (Signal connector on system board)
SL1_PCH_SA1 (Signal connector on system board)
SL1_PCH_SA1 (Signal connector on system board)
SL1_PCH_SA1 (Signal connector on system board)
PIB_CONNECTOR (PIB connector on system board)
HDD/ODD_PWR (HDD/ODD power connector on system
board)
To
CTRL_SRC_SA1 (Signal connector on the PERC)
CTRL_SRC_SA1 (Signal connector on the PERC)
CTRL_SRC_SA1 (Signal connector on the PERC)
CTRL_SRC_SA1 (Signal connector on the PERC)
HDD/ODD_PWR (HDD/ODD power connector on system
board)
HDD/ODD_PWR (HDD/ODD power connector on system
board)
Installing and removing system components 45