Care & Maintenance - Levoit Vital 200S User Manual

EN
C A R E & M A I N T E N A N C E
Cleaning the Smart Air Purifier
• Unplug before cleaning.
• Wipe the outside of the air purifier with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
• Vacuum the inside of the air purifier.
• Do not clean with abrasive chemicals or
flammable cleaning agents.
Check Filter Indicator
will light up as a reminder to check the
filter. Depending on how often you use
the air purifier, the indicator should turn on
after about 12 months. You may not need to
change your filter yet, but you should check it
when lights up.
When your air purifier is set up with the
VeSync app, you can also check the app
to see the remaining filter life. You will also
receive a notification from VeSync when it's
time to check your filter.
Note: The VeSync app uses a scientific
algorithm to determine your filter life based
on air quality, amount of use, and other
factors. The filter life percentage is based
on 12 hours of daily use.
18
Resetting the Check Filter
Indicator
Reset the Check Filter Indicator when:
A. lights up. This is the Check Filter
Indicator light.
• Replace the filter (see page 20).
• Turn on the air purifier.
• To reset the Check Filter Indicator,
press and hold
• The Check Filter Indicator light will
flash, and turn off when successfully
reset. The filter life will show as 100%
in the VeSync app.
B. The filter was changed before
• After replacing the filter, turn on the
air purifier.
• To reset the Check Filter Indicator,
press and hold
• The Check Filter Indicator will flash,
and turn off when successfully reset.
The filter life will show as 100% in the
VeSync app.
for 3 seconds.
lit up.
for 3 seconds.