Insert The Sim Card - Motorola XT2061-3 User Manual

Hide thumbs Also See for XT2061-3:
Table of Contents

Advertisement

Power button
Your Power button helps in a few ways.
» Power on/off: Press and hold the Power button, then tap Power off. When your
phone is off, press and hold the Power button to turn it on.
» Sleep/Wake up: To conserve battery power and prevent accidental touches, put the
touchscreen to sleep by pressing the Power button. Press it again to wake it up.
» Restart: To restart your phone, press and hold the Power button, then tap Restart.
Tip: To add security to your phone, see
Volume buttons
To turn volume up or down:
» Music/video volume: Press the buttons when your phone is not ringing, or during a
song or video, to adjust media volume.
» Ringer volume: Press a volume button, then tap
Press a volume button when your phone is ringing to silence a call.
» Earpiece volume: Press the buttons during a call.
Tip: For more on volume control, see Volume.
Protect your
phone.
and slide the Ring volume bar.

Insert the SIM card

To activate phone service, you might need to insert a SIM card, or this may have been
done for you.
Remove the SIM card tray and insert the SIM
With the phone facing down, insert the SIM tool into the tray hole to pop out the tray.
Caution: Make sure you use the correct size SIM card and don't cut the SIM card.
Nano SIM
SIM card insert graphic. With the phone facing down, insert the SIM tool into the tray hole to pop out the tray. The SIM card is inserted in the slot with the clipped corner to the lower left.
Get Started

Advertisement

Table of Contents
loading

This manual is also suitable for:

Edge+

Table of Contents