Table of Contents
Advertisement
1
ETHERNET
Plug one end of the included Ethernet cable into
the LAN port on the back of the DVR.
NOTE:
Night Owl recommends connecting to the
Internet for the best user experience.
5
POWER CABLE
POWER SPLITTER
CONNECTORS
CONNECTORS
Connect the red female power leads of the video / power
cables to the male power splitter ends.
If you're a First Time User, download the Night Owl app from the App Store or
Google Play Store onto your Smart Device and verify your account. If you already
have an account skip to Step 3.
Follow The Steps Below to Continue Setting up your System For Both Options
2
Router / Network Access Point
(NOT INCLUDED)
RESET
LAN1
LAN2
LAN3
LAN4
ETHERNET
Plug the other end of the Ethernet cable into a port
on the back of your Router / Network Access Point.
NOTE:
As long as your DVR is hardwired using Ethernet
cabling, you can connect to any working network access
point. See your product manual for more details.
6
CAMERA POWER
ADAPTER
POWER
SPLITTER
SURGE PROTECTOR
(NOT INCLUDED)
Connect the power splitter to the camera power
adapter and plug the adapter into a surge
protector or Uninterruptible Power Supply (UPS).
Step 2: Download the Night Owl App
NOTE:
Setup is the same
for Smartphone and Tablet.
3
6
FROM CAMERA
WAN
Connect the end of the camera's cable to the end
of a video / power cable labeled TO CAMERA ONLY.
BEFORE installing, connect and test each camera
locally to confirm they function properly.
7
POWER
Connect the DVR power adapter to the Power Input
on the rear of the DVR.
4
VIDEO / POWER CABLE
Connect the video / power cable labeled TO
DVR ONLY to an open video input on the DVR.
8
SURGE PROTECTOR
Plug the DVR power adapter into a surge
protector or Uninterruptible Power Supply (UPS).
Some systems beep upon booting up.
NOTE:
Make sure you twist
and lock BNC connectors.
(NOT INCLUDED)
NOTE:
Make sure the UPS or
surge protector is switched ON.
Advertisement
Table of Contents
