Washer Maintenance - Maytag MVW18MNBGW Installation Instructions Manual

Table of Contents

Advertisement

Available languages

Available languages

WASHER MAINTENANCE

Operating Tips
It is recommended that fiberglass items not be washed in coin-
operated washers. If these items are washed in the washer, run
the washer through a complete cycle to rinse any residue away
that might be left in the washer.
IMPORTANT: Load detergent, bleach, and fabric softener
before adding clothes and do all of this before starting the
washer as the lid will lock after starting the washer.
14
Transporting Your Washer
• Shut off both water faucets. Disconnect and drain water
inlet hoses.
• Disconnect drain from drain system and drain any remaining
water into a pan or bucket. Disconnect drain hose from back
of washer.
• Unplug power cord.
• Place inlet hoses and drain hose inside washer basket.
• Drape power cord over edge and into washer basket.
• Place packing tray from original shipping materials back inside
washer and reuse shipping base to support the motor and tub.
If you do not have original packaging, place heavy blankets
or towels above basket, between the washer top and the tub
ring. Close lid and place tape over lip and down the front of the
washer. Keep lid taped until washer is moved to new location.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mvw18mnMvw18pdMvw18cs

Table of Contents