Beko WUE7626XBWST User Manual page 19

4.3.7 Special programmes
For specific applications, select any of the following programmes.
• Rinse
Use when you want to rinse or starch separately.
• Spin+Drain
Use this programme to remove the water on the clothes/in the machine.
Before selecting this programme, select the desired spin speed and press Start/Pause button. First,
the machine will drain the water inside of it. Then, it will spin the laundry at the selected spin speed,
and drain the water coming off of the laundry.
If you only want to drain the water without spinning the laundry, select the "Spin+Pump programme,
and use the Spin Speed Adjustment button to select the No Spin function. Press the Start/Pause
button.
C
INFORMATION
• Use a lower spin speed for delicate laundries.
4.3.8 Temperature selection
Whenever a new programme is selected, the recommended temperature for the selected
programme appears on the temperature indicator.
To decrease the temperature, press the Temperature Adjustment button. Temperature will decrease
gradually. When the cold level is selected, temperature level lights will not be on.
C
INFORMATION
• If the programme has not reached the heating step, you can change the temperature without
switching the machine to Pause mode.
4.3.9 Spin speed selection
Whenever a new programme is selected, the recommended spin speed of the selected programme
is displayed on the spin speed indicator.
To decrease the spin speed, press the Spin Speed Adjustment button. Spin speed decreases
gradually. Then, depending on the model of the product, "Rinse Hold" and "No Spin" options
appear on the display. When the "No Spin" function is selected, rinse level indicator lights will not
be on.
Rinse hold
If you are not going to unload your clothes immediately after the programme ends, you can use
rinse hold function to keep your laundry in the final rinsing water in order to prevent them from
getting wrinkled when there is no water in the machine. Press Start/Pause button after this
process if you want to drain the water without spinning your laundry. Programme will resume
where it left off, drain the water and then it will be complete.
If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause
button. Programme will resume. Water will be drained, laundry will be spun and the programme
will end.
C
INFORMATION
• If the programme has not reached the spin step, you can change the spin speed without
switching the machine to Pause mode.
Washing Machine / User's Manual
19 / EN