Panasonic SD-YD250 Manual page 8

Parts Name
No.
1 Positive lock connector
2 Extruded lever
4. Remove the PCB cover assembly by lifting up from the right side.
5. To separate the PCB from the cover assembly, bend back the four
holding tabs while lifting out the PCB. (Fig.6)
Parts Name
No.
1 PCB Cover
2 PCB-(A)
3 Tabs
4 Flat cable
6. Remove the screw of Solenoid holder plate, and Solenoid and
Spring A are detached. (Fig.7)
Fig.6
Fig.7
8