Panasonic SD-YD250 Manual page 37

Parts
1. Belt
2. Pulley B
3. Pulley A / (This part has
been press-fit to the motor
axis.)
Remarks
1. Parts for SD-YD250 shown in the table are not interchangeable
with those parts of earlier models.
2. Parts shown in table are not interchangeable with earlier models.
However, if all three parts (Belt, Pulley and Kneading motor) are
exchanged together, those parts can be used with the SD-YD205/
Y020, YD200.
SD-YD250
5 ribs / Width: 8.0 mm
Width of ditch for belt: 9.6
mm
5 ribs
37
Changes
YD-205/YD20 or YD200
4 ribs / Width: 6.4 mm
Width of ditch for belt: 8.0
mm
4 ribs