Optoma UHZ50 User Manual page 40

USING THE PROJECTOR
HDMI Link Settings
Note:
When you connect HDMI CEC-compatible devices to the projector with HDMI cables, you can control them
on the same power on or power off status using the HDMI Link control feature in the projector's OSD. This
lets one device or multiple devices in a group power on or power off via HDMI Link Feature in a typical
configuration, your DVD player may be connected to the projector through an amplifier or home theater
system.
‡ HDMI Link: Enable/disable the HDMI Link function.
‡ Inclusive of TV: If the settings is set to "Yes" then the power on and power off link options are
available.
‡ Power On Link: CEC power on command.
‡
‡
‡
‡ Power Off Link: Enable this function to let both HDMI Link and projector to be automatically turned off
at the same time.
Test Pattern
Select the test pattern from green grid, magenta grid, white grid, white, or disable this function (off).
Remote Settings
‡ IR Function: Set the IR function setting.
‡
‡
Projector ID
ID definition can be set up by menu (range 0-99), and allow user control an individual projector by using RS232 command.
12V Trigger
Use this function to enable or disable the trigger.
Note:
3.5mm mini jack that outputs 12V 500mA (max.) for relay system control.
‡ On: Choose "On" to enable the trigger.
Off: Choose "Off" to disable the trigger.
‡
40 English
HDMI
Mutual: Both projector and CEC device will be turned on simultaneously.
PJ  Device: The CEC device will be turned on only after the projector is switched on.
Device  PJ: The projector will be switched on only after the CEC device is turned on.
On: Choose "On", the projector can be operated by the remote control from top and front IR
receivers.
Off: Choose "Off", the projector can't be operated by the remote control. By selecting "Off", you
will be able to use the Keypad keys.
HDMI
Amplifier
+12V
GND
DVD Player