Table of Contents
Advertisement
USING THE PROJECTOR
‡
Graphics: For PC / Photo source.
Standard(2.2): For standardized setting.
‡
1.8 / 2.0 / 2.4 / 2.6: For specific PC / Photo source. 2.4 and 2.6 can also be used for video content and
‡
games to enable deeper contrast.
‡
3D: To experience the 3D effect, you need to have 3D glasses. Make sure your PC/portable device
has a 120 Hz signal output quad buffered graphics card and a 3D Player installed.
Note:
These options are only available if the 3D mode function is disabled. In 3D mode, user can only select "3D"
for Gamma setting.
Color Settings
Configure the color settings.
‡
BrilliantColor
enable higher brightness while providing true, more vibrant colors in picture.
Color Temperature: Select a color temperature from Warm, Standard, Cool, and Cold.
‡
‡
Color Matching: Select the following options:
±
Color: Adjust the red (R), green (G), blue (B), cyan (C), yellow (Y), magenta (M), and white (W)
level of the image.
±
Hue: Adjust the color balance of red and green.
±
Saturation: Adjust a video image from black and white to fully saturated color.
±
Gain: Adjust the image brightness.
±
Reset: Return the factory default settings for color matching.
±
Exit: Exit the "Color Matching" menu.
‡
RGB Gain/Bias: This settings allows to configure the brightness (gain) and contrast (bias) of an
image.
±
Reset: Return the factory default settings for RGB gain/bias.
±
Exit: Exit the "RGB Gain/Bias" menu.
‡
Color Space (HDMI Input 1 only): Select an appropriate color matrix type from the following: Auto,
RGB(0-255), RGB(16-235), and YUV.
‡
Color Space (HDMI2/Home/Component only): Select an appropriate color matrix type from the
following: Auto, RGB(0-255), and RGB(16-235).
Note:
Color Space function is not supported if the source is HDMI3.
Brightness Mode
Manually choose the power percentage for brightness mode and adjust the brightness mode settings.
‡
DynamicBlack: Use to automatically adjust the picture brightness in order to give optimum contrast
performance.
Eco.: Choose "Eco." to dim the projector laser diode which will lower power consumption and extend
‡
the laser diode life.
‡
Constant Power: Choose the power percentage for brightness mode.
Constant Luminance: Constant Luminance varies the strength of LD luminance such that the
‡
brightness maintains consistent with time.
Reset
Return the factory default settings for color settings.
34
English
: This adjustable item utilizes a new color-processing algorithm and enhancements to
TM
Advertisement
Table of Contents
