Netafim Orbia GrowSphere MAX User Manual page 108

GrowSphere
Operating System
6.3.1 Viewing Active Alerts
Active alerts includes all alerts that are currently active and alerts that were activated and were not reseted. Perform the following steps to view information about currently active alerts:
2.
Tap the Active Alerts
tab
1.
Tap the Alerts button
SAFETY QUICK START
Active alert icon
The Active Alerts tab can be accessed
from any screen by clicking the Alert
button at the top of the screen.
108 | Controller Operation
INTRODUCTION INSTALLATION
Rev 01 | GrowSphere MAX User Manual
CONTROLLER CONTROLLER
CONFIGURATION OPERATION
3.
Select a date
4.
View information about the alerts
on the selected date
Severity:
z
Critical
z
Not critical
z
Description: Cause of the alert.
z
Date & Time: When the alert was triggered.
z
Source: The source of the alert.
z
Device: The specific device which triggered
z
the alert.
Program: The name and number of the
z
irrigation program which was running when
the alert was triggered.
Shift: The shift number at the time the alert
z
was triggered.
Reset buttons
Tap the Reset button to reset a specific alert,
or tap the Reset All button to reset all active
alerts. Once reset, these alerts are displayed
in the History Alerts tab (see Viewing Alert
History).