Listening To The Radio - Teac CD-X10I Owner's Manual

1
1
Press the FUNCTION button to select "TUNER".
< You can also use the FM/AM button to select "TUNER".
2 Press the FM/AM button to select a band.
3 Select the station you want to listen to (auto selection).
Hold down the Skip button (.or/) until the frequency
display begins to change. When a station is tuned in, the
tuning process will stop automatically.
< To stop the auto selection, press the Skip button
(.or/).
Selecting stations which cannot be tuned automatically
(manual selection)
When the Skip button (.or/) is pressed momentarily,
the frequency changes by a fixed step.
Press the Skip button (.or/) repeatedly until the station
you want to listen to is found.

Listening to the Radio

2 3
FM MODE button
Pressing this button alternates between STEREO mode and
MONO mode.
STEREO
FM stereo broadcasts are received in stereo and the
"STEREO" indicator lights in the display.
< If the sound is distorted and the "STEREO" indicator flashes,
the signal is not strong enough for good stereo reception. In
this case, change to MONO mode.
MONO
To compensate for weak FM stereo reception, select this
mode. Reception will now be forced to monaural, reducing
unwanted noise.
If the reception is poor
For the best reception, rotate the FM or the AM antenna until
you get stations clearly.
21