Teac CD-X10I Owner's Manual page 25

7 Press the SKIP button (.//) to set the volume, and
then press the TIMER button.
Setting the timer is now completed and the timer is
turned on.
Your timer setting is displayed one by one, and the TIMER
indicator lights on the display.
8 Prepare the source.
If you selected "iPod" in step
If you selected "CD" in step
If you selected "TUNER" in step
9 Press the STANDBY/ON button to turn the unit off
(standby).
The clock and the TIMER indicator are displayed.
The unit will turn on and off at the specified time every day.
Don't forget to turn the unit off (standby), or the timer
won't work.
< Playback volume will gradually increase up to your set volume
when the unit is turned on by timer.
< If the source is set to "iPod" but no iPod is set, the unit will
turn on into TUNER mode.
< If the source is set to "CD" but no disc is set, the unit will
turn on into TUNER mode.
< When the source is set to "TUNER" and the unit turns on, it
will tune in to the station you selected last time.
If the power switch of the subwoofer turned off, the
settings kept in memory (clock, preset stations, timer
setting) will be erased.
6
, insert an iPod.
6
, set a disc.
6 , tune in a station.
To turn on or off the timer
When you don't use the timer, press the TIMER button to
turn it off. (The TIMER indicator disappears from the display.)
Press the TIMER button again to turn it on.
< When the timer is turned on, the timer settings are displayed
one by one, and the TIMER indicator lights on the display.
25