Tascam DM-24 Installation Information page 4
Software upgrade installation procedure
Hide thumbs
Also See for DM-24:
- Owner's manual (146 pages) ,
- Service manual (90 pages) ,
- Automation manual (36 pages)
Advertisement
TASCAM
TEAC Professional Division
7733 Telegraph Road
Montebello, CA 90640
Phone (323) 726-0303
Fax (323) 727-7632
5.
Looking into the unit from the rear right side, you will see the (3) I.C.'s to be replaced.
(See Ex. 4)
MAIN
U7
The EPROM can be removed by sliding the black plastic locking device
in the direction shown below. The holder then lifts from the PCB allowing
removal of the EPROM. Reverse the procedure to install the new
EPROM.
INSTALLATION INFORMATION
Detach
Attach
. . . . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . .
PANEL
U31
MAIN
U6
Ex. 4
Advertisement
