Tascam CD-BT1 Owner's Manual page 9

Adjusting the balance
Inputs
e  has three input sources
 the  being played
 the bass connected to the
IN jack
 any stereo input connected to the
LINE IN jack
e first and last of these cannot have
their input levels changed by the 
 but see below for details of how
to balance the  with the input
 se the level control of the device
connected to LINE IN
level of this source remember that
this source cannot be effected by
the s effects
 se the s
INPUT
to adjust the level of the bass be
fore it is sent to the effect
 hen a menu is not selected you
can use the and
6 n
the relative balance of the bass
but not the LINE IN source com
pared to the output from the 
������������������������
�������������������
���������5�����b������
BASS
�������������������
��������������������
�������������������
to adjust the
control
player is
between
emember that this is only pos
sible when not in menu mode
keys to set
 se the s menu system
to adjust the output level of the
effect
��������������
����������������������
�������������
���������������
������������������
������������������
����������������
��������������
value can be set to
MIX
and 
–5 +5
Making connections
�����������������
���������������
���������������
�������������
����������������
���������������������
�����������������������
���������������
Outputs
ere are two outputs the line and the
headphones ese cannot have their
levels set separately—use the
control to set the overall output level
TASCAM CD-BT1 —
OUTPUT
9