Page 1
CD-BT1 @# Portable CD Bass Guitar Trainer OWNER’S MANUAL This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number _____________ Serial number _____________ D00851300A...
Page 2
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. — TASCAM CD-BT1MKII FOR U.S.A. TO THE USER This equipment has been tested and found to comply with the limits for a Class B digital de- vice, pursuant to Part 15 of the FCC Rules.
Do not install this apparatus in a confined space such as a book case or similar unit. • The apparatus draws nominal non-operating power from the AC outlet with its POWER switch in the off position. Important Safety Instructions TASCAM CD-BT1MKII —...
Page 4
TACT YOUR NEAREST QUALIFIED SERVICE PERSONNEL, AND DO NOT USE THE PROD- UCT IN ITS DAMAGED STATE. Optical pickup: Type KSM-900AAA Manufacturer: SONY CORPORATION Laser output: <1 mW play on the objec- tive lens Wavelength: 775—816 nm — TASCAM CD-BT1MKII...
Using the CD player...16 Pitch and tempo changes ...17 Using CD effects ...18 Using built-in effects ...19 Equalizer...21 Using the metronome...22 Using the tuner...23 Changing your preferences for the CD-BT1MKII ...24 Facts and figures (specifications) ...25 MENU Table of contents TASCAM CD-BT1MKII —...
Wipe in a straight motion from the inside to the outside of the — TASCAM CD-BT1MKII disc. Small dust particles and light stains will have absolutely no ef- fect on reproduction quality. Never use such chemicals as re- cord sprays, antistatic sprays or fluid, benzine or thinner to clean...
While using battery power, the CD player and CD functions of the CD- BT1MKII shut down automatically if any of the following conditions lasts more than 5 minutes: (the CD part of the display shows CD OFF (continued on the next page) TASCAM CD-BT1MKII —...
Page 8
— TASCAM CD-BT1MKII Operation using an AC adapter Connect a TASCAM PS-PS5 AC adapter (sold separately) to the DC IN jack at the back of the CD-BT1MKII. Insert the plug of the AC adapter into a domestic AC power outlet.
Press and hold down the key For example, in the case of the TUNER/ SETUP key, the Tuner menu is acti- vated when you tap the key lightly, and if you press and hold it down the key activates the Setup menu. TASCAM CD-BT1MKII —...
Page 10
Part names and functions (Continued) 1) DC IN Jack Use this jack to connect the DC plug of a TASCAM PS-PS5 AC adapter (sold separately). 2) Battery Compartment Remove the battery compartment cover at the back of the CD-BT1MKII in or- der to insert 4 AA (SUM-3) batteries.
Page 11
23) FOOT Jack Connect a standard footswitch to this jack, such as the recommended TASCAM RC-30P (sold separately). You can choose from variety of func- tions to use with a footswitch. (See Changing your preferences). 24) POWER Switch This switch turns the power to the whole unit on and off.
Adjusting the input level Use the INPUT control to adjust the level of the input signal from the jack. — TASCAM CD-BT1MKII Inputting signals from external devices ( LINE IN The LINE IN jack accepts a stereo mini-jack plug (3.5mm).
Page 13
/ push-to-break) of the footswitch using the item in the Setup menu. CAUTION To avoid problems with your CD-BT1MKII, use only a footswitch such as the TASCAM RC-30P (sold separately) that has a standard phone (tip and sleeve) plug. TASCAM CD-BT1MKII —...
KEY / CD EFF Metronome menu Press and hold down the STOP key. The menu then shows the menu cate- gory you select, reversed and blinking. — TASCAM CD-BT1MKII Menu Menu Values (default values Category Item are underlined) EFFECT ON/OFF 1 –...
Page 15
PREV NEXT keys. Changing the setting values Change the setting values using the DOWN keys. Exiting the menu system Press the TIME/ESC key to exit the menu system and go back to the home display mode. TASCAM CD-BT1MKII —...
“flashes” automati- cally back to the last point- where playback started. With a TASCAM RC-30P footswitch (sold separately) connected, you can use it instead of the free operation. Set the Setup menu to...
0 – +50. When the fine tuning is set to a value other PREV than zero, shows in the home dis- play mode. key to (continued on the next page) TASCAM CD-BT1MKII — 6). When key to PREV key to set...
CD effects. BEE (Bass Enhancement Effect) BEE reduces or enhances the bass com- ponent of the CD playback. — TASCAM CD-BT1MKII Press and hold the TMP/KEY / CD EFF key to enter the CD Effect menu. Press...
For ex- ample, if you choose “compressor 5,“ the display shows . The LIB:c5 components displayed are COMPL . All four compo- COMPH (continued on the next page) TASCAM CD-BT1MKII — –...
Page 20
If you have connected a footswitch such as TASCAM RC-30P (sold separately), you can step through the bank slots by pressing the footswitch. Make sure that FOOT in the Setup menu is set to either FX+ or FX-.
EQ/EDIT slot you want to recall. If you have connected a footswitch such as TASCAM RC-30P (sold separately), you can step through the bank slots by pressing the footswitch. Make sure that FOOT in the Setup menu is set to EQ+.
You can set the value between 40 and 220 BPM (beats per minute) and you will hear the sound of — TASCAM CD-BT1MKII metronome beats as soon as you set the value. Choosing the beats 1. Press either the...
A4 between 435Hz and 445Hz. Tap the TUNER/SETUP key to en- ter the Tuner menu, and select the function by pressing either the PREV NEXT key. Press either the DOWN key to set a value be- tween 435 and 445 (Hz). TASCAM CD-BT1MKII —...
fine tuning (See Pitch and FIN: tempo changes) Footswitch function This function allows you to use a footswitch such as the recommended TASCAM RC-30P (sold separately), to change the effect slot, cue, or CD rewind/fast forward. Select in the Setup menu, and se- FOOT...
> 88 dB < 0.01% Digital signal processing 32-bit Specifications and the appearance of the CD-BT1MKII may change without notice for improvement reasons. The illustrations in this manual may differ slightly from the actual product. TASCAM CD-BT1MKII —...
Page 28
17 Rue Alexis-de-Tocqueville CE 005 92182 Antony Cedex FRANCE +33-1-42-37-01-02 TEAC ITALIANA S.p.A. Via C Cantu 11 20092 Cinisello Balsamo Milano ITALY +39-02-66010500 TEAC AUSTRALIA PTY., LTD. 280 William St Melbourne Victoria 3000 AUSTRALIA +61-3-9672-2400 www.tascam.com www.tascam.com www.tascam.com www.tascam.com www.tascam.co.uk www.tascam.de www.tascam.fr www.teac.it www.teac.com.au...