Using The Menu System - Tascam CD-BT1 Owner's Manual

Using the menu system

ee the table on this page for details of
the different menus and their settings
o enter the menu system press the
LCD MENU key until the menu you
want appears shown in a flashing re
versed box and the first menu item is
shown on the main part of the screen
se the up or down keys 
 to set the value of the first menu
n
item
ote that you do not need to press
ENTER to set the values e settings
change as soon as the key is pressed
ress ENTER to move to the next
menu item in the list
ress MENU to move to the next menu
and its first menu item
xit the menu system using the
DISPLAY/ESC key
NOTE
The TUNER menu requires you to press
ENTER
after the TUNER menu is shown on
screen (as the effect sound is cut when the
tuner is operational).
10
— TASCAM CD-BT1
Menu Menu item
EFF
and
6 LIB
Parameter(s)
EFFECT
MIX1 and/or
MIX2
LVL
PIT
PITCH
SSA
KEY
KEY
FINE
BEE
PLAY
MENU
CUE
FOOT
Values
ON/OFF turns effect on or off
00 to 15 preset number
depends on effect type—there may be
—
more than one parameter
The ratio of effect to "dry" signal for the
00 to 20
different units in the effect chain
0 to 64 effect output level
0 to –50% (pitch) or 0, –8, sets pitch control or slow speed audition
–16, –32 and –50 (SSA) values
SSA ON/OFF Sets slow speed audition on or off
I6 to O6 (or SSA) sets key change in semitones
–50 to +50 (or SSA) sets key change in cents
Bass Enhancement Effect (affects CD
OFF, BST, ENH, CUT
playback – see below for details)
ALL/SGL all or single play
CUE/FLS cue or "flash play" operation
sets footswitch mode: either step through
EFF/CUE
the effect slots, or cueing
Notes