Targus PAUH210U User Manual page 7

NOTE: If you are using the hub with just one USB connection,
any devices attached to the hub that require heavy power,
such as a printer or external storage device, may operate
slower due to reduced bandwidth. To increase speed, use the
device's AC power adapter, or connect the red USB type A
connector to your computer.
4 Plug the cable's USB type B connector end into the hub.
Your computer's operating system automatically detects
the new hardware and begins installing the appropriate
default drivers.
5 Follow the on-screen instructions to complete the driver
installation.
You can now connect USB devices to the hub or
daisy-chain additional hubs.
Connecting Devices to the USB Hub
To connect a USB device, plug it into a USB port on the hub
and follow any additional instructions provided with the
device.
When connecting new devices to the hub, consider the
following guidelines:
• If your computer is running the Windows
system, a series of screens appear, beginning with the Add
New Hardware Wizard, to guide you through the driver
installation process.
• If your computer is running the Windows
Edition, Windows
system, the device drivers may install automatically.
®
2000 or Windows
7
®
98 operating
®
Millennium
®
XP operating